Fence Jigs

The files for this are on thingiverse at Table Saw Fence Jigs

I've created a much more accurate rip fence for my old Craftsman table saw by simply making a plywood angle that can be secured anywhere on the cast iron top with a magswitch at each end.

To position it accurately, I use the jigs to set the required distance the same at the near and far edge of the table and lock the plywood fence in place after moving it to touch the ends of each jig like so:

Infinitely more babbling about the fence can be found here.

The small yellow parts were printed on the solidoodle, but the main structure was printed on Jiggit

The continuing saga of the table saw improvements can be found here.