Extension Cord Holder

This is on thingiverse as Extension Cord Holder.

I needed to hang the extension cord on the back of my scan station, so I whipped out this gadget to screw to the back of the cart and hold the extension cord.

Using the 3D printer for this was almost certainly overkill, but as long as I had it, I figured I might as well use it. It took about 3 hours to print at 15% infill, and the overhang didn't print very well once it got near the top of the print and was trying to print almost flat, but it still came out as a useful object.

Go back to my main Solidoodle page.