Vertical Alignment of Blade

I 3D printed a jig for blade alignment:

Vertical Alignment Jig

While poking around in the inards of the saw, I noticed stops with set screws on the long screw that tilts the blade. Presumably those are for positively locking in the 90 degree and 45 degree limits of blade tilt, but I wouldn't trust them to be as reliable as the dial indicator jig, so I didn't try to adjust them.

I didn't glue the two parts together at first, but eventually the tight push fit got less tight, so I hit it with CA glue.

See my other Craftsman 113 projects.

Page last modified Thu Mar 17 21:37:14 2022