Kitchen Wrap Holder

To get various kitchen wraps off the counter, I whipped out these kitchen wrap holders which are screwed to the inside of a cabinet door:

I cut a piece of cardboard the size of the cabinet door and laid out all the parts on it to make a drilling guide, taped the cardboard to the inside of the door, drilled the screw pilot holes (avoiding drilling all the way through the door), then screwed all the pieces into place with some half inch wood screws.

The holes in the front were for a screwdriver so I didn't have to fool with an offset driver (which probably would have taken hours).

This is on thingiverse as Kitchen Wrap Holder